Skip to main content

The McLaren Speedtail is a 250-mph, 1,000-hp work of art on wheels

From its carbon-fiber body to its gold-lined engine bay, the McLaren F1 had many distinctive features. But the most unusual was its three-seat cabin layout, which placed the driver in the middle for a racecar-like feel. McLaren looked to the F1 for inspiration as it developed a limited-edition hyper-GT named Speedtail.

Recommended Videos

The car is called BP23 internally, a name which stands for “bespoke project 2,” and also refers to the three-abreast seating arrangement. Like the sold-out P1, the Speedtail is powered by a gasoline-electric hybrid powertrain built around a V8 engine, although McLaren isn’t divulging additional technical details at this time. We know the system generates 1,035 horsepower, which is enough to send the Speedtail to a top speed of 250 mph. That figure that makes it the fastest McLaren road car ever. It’s capable of accelerating from zero to 186 mph in 12.8 seconds.

The curvaceous front-end design makes the teardrop-shaped, carbon fiber-bodied Speedtail immediately recognizable as a member of the McLaren family but the similarities with other models end there. The roof line peaks above the front passenger and slopes down until it flows into an impossibly low rear end. Pinning down this highly aerodynamic design was a key part of making the Speedtail capable of 250-mph runs. Designers also removed every exterior component that adds drag, which is why you don’t see a big wing out back or mirrors on the doors. They’ve been replaced by seriously cool power-retractable cameras that transfer footage to screens inside. The carbon fiber covers on the front wheels reduce air turbulence around the wheel arches.

The Speedtail isn’t a stripped-out track special, though; that’s what the Senna is for. Instead, McLaren promises the lucky few buyers that it will deliver its most opulent model to date, one that offers a blend of extreme performance and sporting luxury. It stands out with the same dihedral doors used on every other current McLaren, but they’re power-operated for the first time. The use of new materials provide buyers with a wider range of customization options than ever before, including badges made with 18-carat gold or platinum.

The three-abreast seating arrangement gave McLaren the freedom to design the interior around the driver. The central screen replaces the instrument cluster, while the two screens on either side of the steering wheel display portions of the infotainment system. The two outer screens show the driver what’s behind the car. This setup creates a clean, clutter-free, and perfectly symmetrical cockpit that’s a treat for the eyes. Since there’s no center console, McLaren moved the handful of switches and buttons that couldn’t be eliminated — including the ones used to select drive, neutral, or reverse — to clusters above the windshield. These buttons are milled from aluminum and hand-polished.

If you’re wondering where the sunvisors are, you’re not alone. McLaren points out they’re simply not needed. The top part of the windshield is made with electrochromic glass that darkens at the push of a button.

Speedtail production will be limited to just 106 units — matching the total production run of the F1 — and all of them have already been sold in spite of a price tag pegged in the vicinity of $2.2 million. Deliveries will begin in 2020.

There’s one major catch, according to Autoblog: the Speedtail isn’t street-legal in the United States. The roughly 30 examples earmarked for the American market will arrive under the Show and Display rule, which grants an exemption from safety and emissions regulations to models considered historically or technologically interesting. In exchange, they’re only allowed in to be, well, showed or displayed. They can’t be driven for more than 2,500 miles annually. High-mileage supercars are rare in any event, so the caveat shouldn’t discourage Speedtail owners from taking them out every once in a while.

Update: Added official information about the Speedtail.

Ronan Glon
Former Digital Trends Contributor
Ronan Glon is an American automotive and tech journalist based in southern France. As a long-time contributor to Digital…
Rivian set to unlock unmapped roads for Gen2 vehicles
rivian unmapped roads gen2 r1t gallery image 0

Rivian fans rejoice! Just a few weeks ago, Rivian rolled out automated, hands-off driving for its second-gen R1 vehicles with a game-changing software update. Yet, the new feature, which is only operational on mapped highways, had left many fans craving for more.
Now the company, which prides itself on listening to - and delivering on - what its customers want, didn’t wait long to signal a ‘map-free’ upgrade will be available later this year.
“One feedback we’ve heard loud and clear is that customers love [Highway Assist] but they want to use it in more places,” James Philbin, Rivian VP of autonomy, said on the podcast RivianTrackr Hangouts. “So that’s something kind of exciting we’re working on, we’re calling it internally ‘Map Free’, that we’re targeting for later this year.”
The lag between the release of Highway Assist (HWA) and Map Free automated driving gives time for the fleet of Rivian vehicles to gather ‘unique events’. These events are used to train Rivian’s offline model in the cloud before data is distilled back to individual vehicles.
As Rivian founder and CEO RJ Scaringe explained in early March, HWA marked the very beginning of an expanding automated-driving feature set, “going from highways to surface roads, to turn-by-turn.”
For now, HWA still requires drivers to keep their eyes on the road. The system will send alerts if you drift too long without paying attention. But stay tuned—eyes-off driving is set for 2026.
It’s also part of what Rivian calls its “Giving you your time back” philosophy, the first of three pillars supporting Rivian’s vision over the next three to five years. Philbin says that philosophy is focused on “meeting drivers where they are”, as opposed to chasing full automation in the way other automakers, such as Tesla’s robotaxi, might be doing.
“We recognize a lot of people buy Rivians to go on these adventures, to have these amazing trips. They want to drive, and we want to let them drive,” Philbin says. “But there’s a lot of other driving that’s very monotonous, very boring, like on the highway. There, giving you your time back is how we can give the best experience.”
This will also eventually lead to the third pillar of Rivian’s vision, which is delivering Level 4, or high-automation vehicles: Those will offer features such as auto park or auto valet, where you can get out of your Rivian at the office, or at the airport, and it goes off and parks itself.
While not promising anything, Philbin says he believes the current Gen 2 hardware and platforms should be able to support these upcoming features.
The second pillar for Rivian is its focus on active safety features, as the EV-maker rewrote its entire autonomous vehicle (AV) system for its Gen2 models. This focus allowed Rivian’s R1T to be the only large truck in North America to get a Top Safety Pick+ from the Insurance Institute for Highway Safety.
“I believe there’s a lot of innovation in the active safety space, in terms of making those features more capable and preventing more accidents,” Philbin says. “Really the goal, the north star goal, would be to have Rivian be one of the safest vehicles on the road, not only for the occupants but also for other road users.”

Read more
Jaguar Land Rover, Nissan hit the brake on shipments to U.S. over tariffs
Range Rover Sport P400e

Jaguar Land Rover (JLR) has announced it will pause shipments of its UK-made cars to the United States this month, while it figures out how to respond to President Donald Trump's 25% tariff on imported cars.

"As we work to address the new trading terms with our business partners, we are taking some short-term actions, including a shipment pause in April, as we develop our mid- to longer-term plans," JLR said in a statement sent to various media.

Read more
Toyota shifts gears: 15 New EVs and a million cars by 2027
Front three quarter view of the 2023 Toyota bZ4X.

After years of cautiously navigating the electric vehicle (EV) market, Toyota is finally ramping up its commitment to fully electric vehicles.
The Japanese automaker, which has long relied on hybrids, is now planning to develop about 15 fully electric models by 2027, up from five currently. These models will include vehicles under the Toyota and Lexus brands, with production expected to reach 1 million units annually by that year, according to a report from Nikkei.
This strategy marks a significant shift for Toyota, which has thus far remained conservative in its approach to electric cars. The company sold just 140,000 EVs globally in 2024—representing less than 2% of its total global sales. Despite this, Toyota is aiming for a much larger presence in the EV market, targeting approximately 35% of its global production to be electric by the end of the decade.
The Nikkei report suggests the company plans to diversify its production footprint beyond Japan and China and expanding into the U.S., Thailand, and Argentina. This would help mitigate the impact of President Donald Trump’s 25% tariffs on all car imports, as well as reduce delivery times. Toyota is also building a battery plant in North Carolina.
For now, Toyota has only two fully electric vehicles on the U.S. market: The bZ4X  and the Lexus RZ models. The Japanese automaker is expected to introduce new models like the bZ5X and a potential electric version of the popular Tacoma pickup.
Separately, Toyota and Honda, along with South Korea’s Hyundai, all announced on April 4 that they would not be raising prices, at least over the next couple of months, following the imposition of U.S. tariffs. According to a separate Nikkei report, Toyota’s North American division has told its suppliers that it will absorb the extra costs of parts imported from Mexico and Canada. Another 25% for automotive parts imported to the U.S. is slated to come into effect on May 3.

Read more